| Customization: | Available |
|---|---|
| After-sales Service: | 7*24 Hours Online Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Name | Quantity |
| 1.0 | Drying hopper | 1 |
| 2.0 | Extruding machine | |
| 2.1 | ABS PLA single screw extruder | 1 |
| 2.2 | Bush die | 1 |
| 3.0 | Water sink | 1 |
| 4.0 | Traction machine | 1 |
| 5.0 | Wire storage support | 1 |
| 6.0 | Infrared diameter gauging device | 1 |
| 7.0 | Winding machine | 1 |
| 8.0 | Single coil forming machine | 1 |
| 1.0 Name: drying hopper | ||
| Volume: | 60L; | |
| Output: | 50kg/h; | |
| Heating power: | 10kw; | |
| Characteristics: | Protect the fan and electric heating tube. Famous brand electric elements and stable performance. Materials of theating tube: 304 stainless steel without pollution and long service life. The sealing rings adopt the insulation silicone rubber. | |
| 2.1 Name: single screw extruder(TD-SJC25) | ||
| Screw diameter: | Φ25mm; | |
| L/D: | 25; | |
| Screw material: | 38CrMoAlA; | |
| Surface treatment of screw: | Hard chromium plating treatment; thickness of chromium coating: 0.5~0.6mm; hardness: HRC65. | |
| Compression ratio: | C/R=3.0 BM screw; The design of screw is applicable to special rollers of ABS PLA plastic granule. |
|
| Heater: | The stainless steel heater with the internal surface receiving polished finish and the external surface of stainless steel. | |
| Heating section and power: | 3 heating sections; 1.8kw/section; | |
| Cooling of the roller: | Air cooling of high efficiency and low noise | |
| Cooling section and power: | 3 cooling sections, 120w/section; | |
| Reduction box: | Hard tooth surface reduction box with spiral speed reduction transmission. | |
| ZLY173 hard tooth surface helical tooth cylindrical gear reduction box, selection of 20CrMn materials, malcomising;the tooth surface receives gear-grinding machining with the noise lower than 75Db and centrifugal lubrication of machine oil. | ||
| Bearing brand: | Japan "NSK" | |
| Driving motor: | AC "TECO" frequency converter, Wannan motor | |
| Control system: | ||
| Cabinet form: | The configuration of insulating plate and ventilating system conforms to the standard of CE certification. | |
| Setting of functional panel: | Power indicator, display of main current/voltage, temperature display of the heating area, heating starting/stoping button, display of screw rotating speed, operation, operation panel, pulling speed control, coiling speed control, plastic wire diameter display alarm button, emergency button. | |
|
||
| 2.2 Name: ABS PLA bush die | ||
| The head of wire drawing machine: 2 molds and applicable to draw wire of 1.6mm, 18.mm,2mm, 2.2m, 2.4mm, 2.6mm, 2.8mm, 3mm. The wire used to make ABS and PLA is 1.75mm and 3mm. | ||
| Bypass discharge device makes it convenient to change color of plastic of different core colors. | ||
| 3.0 Name: water sink(hot water sink and cold water sink) | ||
| Water sink specification: | 304 stainless steel material, the thickness of stainless steel 2.0mm. | |
| Movable water sink | ||
| Circulating water device: | 1 set of centrifugal pump with power 1.1kw; circulating water sink: 304 stainless steel material, maybe connected with the cooling device. |
|
| Water inlet pipe: | 1/2 with stainless steel stop valve | |
| Water outlet pipe: | 1/2 with stainless steel stop valve | |
|
||
| 4.0 Name: infrared ray diameter gauging device | ||
| Diameter measuring scope: | 0.1~15mm | |
| Accuracy: | +/-0.05um | |
| Measuring speed: | 2*1200s/second | |
| The diameter measured can be displayed at the operation panel of the mainframe for the convenience of adjusting the speed of extruding machine or traction to ensure product diameter. | ||
| Able to test transparent and circular products. | ||
| Able to test the data of every surface of plastic wire comprehensively in a three-dimensional manner. | ||
|
||
| 5.0 Name: horizontal wire storage support | ||
| The length of horizontal wire storage support is 4.5m. | ||
| The gear motor of 0.75kw drives the magnetic power clutch to control the linkage of tension and wire-rewinding machine. | ||
| The winding speed is adjusted according to the length of stored wire and the largest length of stored wire is 80m. | ||
| The plastic wheel for wire storage >Φ120mm, wheel number 9+9, the wire storage wheel and shaft are installed with bearing to reduce the resistance. | ||
| The part of chain transmission is installed with safety protections. | ||
| 6.0 Name: traction machine | ||
| Power: | 0.4kw | |
| 2 polyurethane wheels are assembled through pressure spring and sliding device. | ||
| Type og running wheel: | Φ120mm | |
| 7.0 Name: automatic winding device | ||
| Power: | 2.5kw/4p, "TECO" frequency converting control | |
| Flexible flat cable: | Φ20mm bar gathering stand | |
| YAN MING meter counter may set the forecast time and predicated output. The meter counter will alarm automatically when the predicted output is reached. | ||
| Applicable wire shaft according to the requirement of buyer's company(Φ200-Φ300mm) | ||
Our customers:
Related products:Q: Are you trading company or manufacturer?
A: We are factory.We have the technical production team,and the workers are all very experienced.
Q: Why choose you?
A:You can get a very fair price from us and our price can make you beat your competitors in the marke
Q: What kind of certification do you have?
A: Our products have obtained ISO9001 and CE certification,the quality can be guaranteed.We focus on
the field of extrusion machine,and aim to be the best manufacturer of this field.
Q:What's the payment?
A:L/C, T/T, Western Union, Paypal, Money Gram, Cash.
){kind=link}